F-150
PERFORMANCE PARTS

INFO & SPECS
 

I have assembled a collection of select, highest quality parts that will help those of you who are looking to safely increase the output of your supercharged engines without breaking your pocketbook.

Using my years of experience in this industry as founder and former owner of B-H-J Products, Inc, I will attempt to purchase and pass on to you, at similar savings, any item that you need for your upgrade.
 

IN ADDITION TO THE PARTS AND ACCESSORIES SHOWN, I HAVE A LIST OF THE PARTS NECESSARY TO INSTALL A LIGHTNING / HD SUPERCHARGER ASSEMBLY ON A STANDARD F-150 ENGINE. 

 CLICK HERE FOR KIT DETAILS.

NEW PRODUCTS

FUEL PUMP CONTROLLER
This fuel pump voltage controller mimics the dual voltage system used on the OE Ford supercharged trucks.
The OE system is triggered by the TPS voltage through the PCM.  This controller is also triggered by TPS voltage and uses the OE voltage dropping resistor to achieve the identical result.
It can be used with virtually any dual pump setup or a single 325 lph Bosch.

The controller is a complete package.  All components are board
mounted and pre-connected.                                                                                    $ 232.60

WIDE BAND A/F GAUGE
Our newest product line is the INNOVATE MOTORSPORTS line of A/F gauges and dataloggers.  These instruments are state-of-the-art and will give accurate feedback of your air fuel ratio.
InnovateMotorsports
Select your product then contact us for pricing, we will meet or beat any legitimate price.

COIL PACK SCREWS

No more struggling with those miserable coils screws.
Screw these in with your fingers then give them a final 1/4 turn with an open end wrench.
The one under the Fuel Pressure Regulator has a Flex Shaft .  DETAIL PHOTOS                $79.85

Torco "Mach Series Accelerator".  (unleaded)
16 oz (1/2 can) raises you octane rating by 2 points.
Allows for 4 degrees additional advance.
Dyno proven at the Norcal Dyno Day                           Per 32oz Can $17.00
                                                                               Per case (6 cans) $97.00

PULLEYS FOR LIGHTNING AND H-D TRUCKS 

One piece design for simplicity.
Black anodized for durability and appearance.
All pulleys come with the appropriate Goodyear "Gatorback" belt.
Boost levels available, +2, +4, +6, +8psi                                              $ 199.20

AIR INTAKE

90MM "Lightning" MAF  (Ford p/n1L3Z4128579-AA)                                $ 92.00


FUEL PUMPS

Bosch  #0580254005, (new p/n 69434)  In tank, 255 Lph                        $198.75

Installation Hardware Kit for immersion in pump gas
containing ethanol.                                                                              $ 18.50

LINK to 255 LPH installation photos.

Bosch  #0580254979, In line, 235 Lph                                                   $362.50

Bosch  #0580254044, In tank or In line, 325 Lph                                     $327.77
(Race pump, no warranty)


SPARK PLUGS

Motorcraft AWSF-22C.F4                                                                     $ 2.04
Motorcraft AGSF-22C.F6                                                                      $ 2.04
NGK-TR6                                                                                              $ 1.96
NGK-BR7EF                                                                                         $  2.06
Other Brands and heat ranges also available.

COOLING SYSTEM

MADFAN DIY Kit                                                                             $ 343.00
This kit utilizes the trusty RF-86 two speed fan.  The difference is
in the installation.  I set it up to go into the shroud backwards
and then reverse the fan direction.  This gives a cleaner looking
installation and also frees up more space in front of the engine
for access.  Kit includes the Mad Controller, all necessary
hardware, etc.  Requires drilling three holes in your fan shroud.

MADFAN COMPLETE Kit                                                                 $ POR
As above except the fan assembly comes complete installed in a
new, factory fan shroud, ready to drop in and connect the wires.

Multi Function Fan Controller       DETAILS                                      $108.50 
It has an adjustable stage for the first fan or low speed. A second, 
fixed stage (205F on) for the second fan or Hi speed. The third
runs the fan only when the A/C condenser needs it so the fan
doesn't run at freeway speed.

Motorcraft RF-86 18" Curved Blade, 2 speed, Electric Fan
(includes plug and pigtail)                                                                          Call

Fan Package Specials  We can supply virtually any brand and model
with the Multi Function Controller at a very competitive cost.                        Call

20% underdrive Water Pump Pulley, black anodized aluminum.           $ 57.50

Bosch Intercooler Pump,  P/N 0 392 022 002.  This is the 
identical part to the OE Lightning pump                .                                 $ 147.00

IC Pump Including Mounting Bracket and Plug with pigtail.             $190.00

SPAL Intercooler/Heat Exchanger Fans
6.5", two will fit on OE "L" or "HD" heat exchanger (or aftermarket).           $56.94

Install Kit for two fans above                                                                  $16.50
Wiring Kit for two fans above                                                                 $31.50

TRANSMISSION KITS

Factory Tech Valve Body for 4R100 Transmission                                 $ 225.00
PACKAGE DEAL (for 4R100) FTVB, OE 4x4 Pan, Filter                          $ 269.00

Valve Body Plate kits for all 4R70/75 transmissions                                 $ 100.00
(Includes New Filter)

Finned Aluminum Pan for the 4R70/75                                                     $ 107.50

AUTOMETER GAUGES

CLICK HERE FOR A PRICE COMPARISON CHART

++++++CONTACT US++++++

HOME

"FORD" logo is a registered trademark of Ford Motor Company.