[top.htm]

 

 

After you have bought an OE Supercharger, Manifold, Intercooler, etc complete with injectors and engine wiring harness, you will need most of the items listed below.
The kit price will be adjusted on an individual basis after determining if there are parts included that you do not need.

UPDATED 10/10/07

INSTALLATION PARTS LIST

Bracket with idlers and special bolts
Tensioner Assembly
Lightning Alternator
(outright, no core return)
Alternator Stabilizer Bracket
Intercooler Pump with Bracket and Pigtail
Intercooler Reservoir with Cap
IAC Tube
Throttle Cable
Throttle Cable Bracket
Cruise Control Cable
IAT Sensor (fits in air cleaner)
Lightning Water Pump (or suitable substitute)
PCV Tube (left hand side)
TB to MAF Rubber Connector with clamps
90mm MAF
Intake Gasket Set
In-Tank Fuel Pump
Upper Radiator Hose
Upper Two Intercooler Hoses
Original Equipment Installation Bolts
Drive Pulley with Belt  (Boost level of your choice)

                                 APPROXIMATE TOTAL AT LIST PRICE    $ 2893.73

I realize that nobody pays list price.  If you shop around, I think you will find that my kit price is equal to or better than most sources.
Some parts substitutions are made where the replacement is equal to (at a lower price) or better for this somewhat unique application.  For example, rather than paying $95.00 for a water pump with a longer snout when yours is perfectly adequate, but too short, I will supply a precision machined spacer (unless you have e-fans, then it will not be required at all.

In an effort to simplify the ordering process and keep costs to a minimum the kit contents have been adjusted to more accurately cover those items normally needed to install a typical "Take-Off".

                                      
ALL PARTS IN REVISED KIT ABOVE  $1695.00 (approximate price, call for quote)

OPTIONS:

The parts listed above are the minimum requirement to make the system function.  There are additional parts that make the installation simpler and/or improve the appearance.  These are:

Lightning Fan Shroud
Plastic Solenoid Cover
OE Heat Exchanger Brackets

You will need to have a custom tuned flasher or chip to make it all work.   There are many sources to be sure, but "experience counts" so talk to your tuner to be sure he has worked with this combination before.  I have tuners who have done this tune successfully numerous times.  If you don't have somebody who has the appropriate experience locally, I will be glad to share some names with you.

Finally, I also offer my assistance, anytime, with problems or questions about the installation.  I have a list of question with answers and some pix that will help make the installation go smoothly that I will send attached to an e-mail along with your UPS tracking number.  I have been through this process myself and helped numerous others through it.

 

HOME

 

Home

Site Map

© MADENTERPRISE

Contact Us

Terms